Building a patio – Before you start pouring concrete or putting a buffer, you need to plan your space first. Take measurements and mark the borders where the terrace must be. Keep in mind that there are no rules stating that your core must be square. You can design it in the form of geometry you want, depending on your level of expertise, you may want to stick with a box or rectangle and cross the curved line. You can always put some large potted plants in the shape of a round to give the same dramatic effect.
When you complete the homemade terraces, you need to choose concrete, pavers, tiles or bricks as well as the choice of colors or styles in that category. Your estimates may play an important role in this decision as some options will be much more expensive than others. If you have not yet marked the area, you have to do it. You will then dig a space, usually in eight inches, or more if you want the perimeter edge. To test the placement, you will pour a small amount of crushed stone and use a hammer to knock it firmly. Place the nets in the next area to prevent the lawn out, pour sand and smoothly.
12 Photos Gallery of: Building A Patio For Basics
Arrange your choice material one by one on the sand and tap firmly but be careful not to crack. Always place one line completely before you start another. After you finish and your line is all straight and in the place you want, spread the sand in the area. Using a broom, the core sweeper to allow sand to fill every small gap between them. Finally, use your garden hose to clear the area.